Here you can limit the 2.4-GHz channels that are subject to the environment scan.
If you make no entries here, the environmental scan is performed for all channels of the 2.4-GHz frequency band.
- SNMP ID:
- 2.23.20.27.10
- Telnet path:
- Setup > Interfaces > WLAN > Environment-Scan
- Possible values:
- empty
- The environment scan is performed for all channels in the 2.4-GHz frequency band.
- 1
- The environment scan is performed for channel 1 in the 2.4-GHz frequency band.
- 2
- The environment scan is performed for channel 2 in the 2.4-GHz frequency band.
- 3
- The environment scan is performed for channel 3 in the 2.4-GHz frequency band.
- 4
- The environment scan is performed for channel 4 in the 2.4-GHz frequency band.
- 5
- The environment scan is performed for channel 5 in the 2.4-GHz frequency band.
- 6
- The environment scan is performed for channel 6 in the 2.4-GHz frequency band.
- 7
- The environment scan is performed for channel 7 in the 2.4-GHz frequency band.
- 8
- The environment scan is performed for channel 8 in the 2.4-GHz frequency band.
- 9
- The environment scan is performed for channel 9 in the 2.4-GHz frequency band.
- 10
- The environment scan is performed for channel 10 in the 2.4-GHz frequency band.
- 11
- The environment scan is performed for channel 11 in the 2.4-GHz frequency band.
- 12
- The environment scan is performed for channel 12 in the 2.4-GHz frequency band.
- 13
- The environment scan is performed for channel 13 in the 2.4-GHz frequency band.