If unfavorable environmental conditions cause the device to constantly switch between two
frequency bands, instabilities in the transmission may be the result. This selection allows
you to control which frequency bands the mobile networking device can or should use. The
adjustable LTE bands depend on the supported LTE bands of the product. These are listed in
the data sheet of the respective product. The following frequency bands are available:
- B1_2100: Band 1 (2100 MHz) is enabled.
- B2_1900: Band 2 (1900 MHz) is enabled.
- B3_1800: Band 3 (1800 MHz) is enabled.
- B4_2100: Band 4 (2100 MHz) is enabled.
- B5_850: Band 5 (850 MHz) is enabled.
- B7_2600: Band 7 (2600 MHz) is enabled.
- B8_900: Band 8 (900 MHz) is enabled.
- B12_700: Band 12 (700 MHz) is enabled.
- B13_700: Band 13 (700 MHz) is enabled.
- B20_800: Band 20 (800 MHz) is enabled.
- B25_1900: Band 25 (1900 MHz) is enabled.
- B26_800: Band 26 (800 MHz) is enabled.
- B29_700: Band 29 (700 MHz) is enabled.
- B30_2300: Band 30 (2300 MHz) is enabled.
- B41_2600: Band 41 (2600 MHz) is enabled.
- All: All frequency bands are enabled.
Note: This option applies only to the LTE standard frequency bands. All bands can be used for
UMTS and GPRS.
- SNMP ID:
- 2.23.41.1.10
- Telnet path:
- Setup > Interfaces > Mobile > Profiles
- Possible values:
- Alle
- B1_2100
- B2_1900
- B3_1800
- B4_2100
- B5_850
- B7_2600
- B8_900
- B12_700
- B13_700
- B20_800
- B25_1900
- B26_800
- B29_700
- B30_2300
- B41_2600